Remove Baby Floating Survival Cot for In Shop Overhaul

TASK 25-66-41-920-002-A
Remove Baby Floating Survival Cot for In Shop Overhaul

ZONE: 200
FIN: 7606MM2 ** ON A/C NOT FOR ALL

1. Reason for the Job
Refer to the MPD TASK: 256642-01
REMOVE BABY FLOATING SURVIVAL COT FOR IN SHOP OVERHAUL.
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 25-66-00-00	FLOATATION AND SURVIVAL EQUIPMENT - DESCRIPTION AND OPERATION

3. Job Set-up
Subtask 25-66-41-861-052-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-66-41-010-052-A ** ON A/C NOT FOR ALL

B. Get Access
(1) For the location of the Baby Survival Raft, refer to Para. Component Location (Ref. AMM D/O 25-66-00-00).
(2) Open the door/access panel of the related compartment(s).

NOTE: The location of the baby survival raft(s) are shown with placards, which are bonded on the outside of the related compartment(s).

(3) If necessary, release/open the strap/clamp and remove the baby survival raft(s) from the aircraft.

4. Procedure
Subtask 25-66-41-280-051-A ** ON A/C NOT FOR ALL

A. Workshop Procedure
(1) Send the baby survival raft to the workshop.

5. Close-up
Subtask 25-66-41-410-052-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Install a serviceable/replacement baby survival raft(s) and if necessary, attach/close the strap/clamp.
(2) Close the door/access panel of the related compartment(s).
(3) Make sure that the work area is clean and clear of tools and other items.

Subtask 25-66-41-862-052-A ** ON A/C NOT FOR ALL

B. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:41:41 UTC