Remove Door Escape Slide/Raft for In Shop Overhaul

TASK 25-62-47-920-001-A
Remove Door Escape Slide/Raft for In Shop Overhaul

ZONE: 131
ZONE: 132
ZONE: 151
ZONE: 152
FIN: 7691MM ** ON A/C NOT FOR ALL
FIN: 7692MM ** ON A/C NOT FOR ALL
FIN: 7770MM ** ON A/C NOT FOR ALL
FIN: 7771MM ** ON A/C NOT FOR ALL
FIN: 7772MM ** ON A/C NOT FOR ALL
FIN: 7773MM ** ON A/C NOT FOR ALL

1. Reason for the Job
Refer to the MPD TASK: 256247-01
REMOVE DOOR 2 AND 3 ESCAPE SLIDE/RAFT FOR IN SHOP RESTORATION.

NOTE: This task is not applicable for deactivated passenger/crew door.

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
131	FORWARD CARGO COMPARTMENT
132	FORWARD CARGO COMPARTMENT
151	AFT CARGO COMPARTMENT
152	AFT CARGO COMPARTMENT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 25-62-47-000-001-A	Removal of the Escape Slide Enclosure
TASK 25-62-47-400-001-A	Installation of the Escape Slide Enclosure

3. Job Set-up
Subtask 25-62-47-020-051-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Remove the door escape slide/raft (Ref. AMM TASK 25-62-47-000-001).

4. Procedure
Subtask 25-62-47-280-050-A ** ON A/C NOT FOR ALL

A. Procedure
(1) Send the door escape slide/raft to the workshop for overhaul.

5. Close-up
Subtask 25-62-47-420-052-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Install a serviceable or a new door escape slide/raft (Ref. AMM TASK 25-62-47-400-001).

[Rev.10 from 2021] 2026.03.31 23:40:48 UTC