Inspection/Check of the Captain/First Officer Emergency Descent Device
TASK 25-61-41-200-001-A
Inspection/Check of the Captain/First Officer Emergency Descent Device
1. Reason for the Job
Refer to the MPD TASK: 256141-01
DETAILED INSPECTION OF EMERGENCY ESCAPE ROPE AND ROPE ATTACHMENT
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 25-61-41-020-051-A
Subtask 25-61-41-210-050-A
Subtask 25-61-41-420-051-A
[Rev.10 from 2021]
2026.03.31 23:39:45 UTC
Inspection/Check of the Captain/First Officer Emergency Descent Device
1. Reason for the Job
Refer to the MPD TASK: 256141-01
DETAILED INSPECTION OF EMERGENCY ESCAPE ROPE AND ROPE ATTACHMENT
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
Subtask 25-61-41-020-051-A
A. Removal of the Ceiling Panel on the Emergency Descent Device
(1) Remove the cover (3).
(2) Remove the screws (1).
(3) Remove the lining panel (2).
4. Procedure(1) Remove the cover (3).
(2) Remove the screws (1).
(3) Remove the lining panel (2).
Subtask 25-61-41-210-050-A
A. Inspection/Check of the Captain and F/O Emergency Descent Device
(1) Make sure that the fitting (4) of the emergency descent device and the 2 screws that attach it to the airframe (frame 11), shows no signs of corrosion or damage.
(2) Make sure that the loop of the emergency descent device shows no signs of wear.
(3) Remove the emergency descent device from its housing. Make sure that it is in the correct condition.
5. Close-up(1) Make sure that the fitting (4) of the emergency descent device and the 2 screws that attach it to the airframe (frame 11), shows no signs of corrosion or damage.
(2) Make sure that the loop of the emergency descent device shows no signs of wear.
(3) Remove the emergency descent device from its housing. Make sure that it is in the correct condition.
Subtask 25-61-41-420-051-A
A. Installation of the Ceiling Panel of the Emergency Descent Device
(1) Install the emergency descent device in its housing.
(2) Put the lining (2) in position.
(3) Install the screws (1).
(4) Install the cover (3).
(1) Install the emergency descent device in its housing.
(2) Put the lining (2) in position.
(3) Install the screws (1).
(4) Install the cover (3).
Captain/First Officer Emergency Descent Device