Detailed Inspection of Divider Nets, Door Nets and Net Attachment Points

TASK 25-50-00-200-025-A
Detailed Inspection of Divider Nets, Door Nets and Net Attachment Points

ZONE: 130
ZONE: 150
ZONE: 160

1. Reason for the Job
Refer to the MPD TASK: 255000-16
DETAILED INSPECTION OF DIVIDER NETS, DOOR NETS AND NET ATTACHMENT POINTS
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)
No specific	1	WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
130	FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX
150	AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT
160	BULK CARGO COMPARTMENT AFT BULKHEAD OF AFT CARGO COMPARTMENT TO AFT BULKHEAD OF BULK CARGO COMPARTMENT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 25-50-00-200-001-A	Visual Inspection of the Cargo Compartment and the Components of the Cargo Loading System (CLS)
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-002-A	Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump

3. Job Set-up
Subtask 25-50-00-860-078-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-50-00-010-112-A

B. Get Access
(1) Open the forward and/or aft cargo-compartment door(s) (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward and/or aft cargo-compartment door(s).
(3) Set the light switch to on.
(4) Put the WARNING NOTICE(S) on the control panel(s) of the cargo loading system to tell persons not to use it.

4. Procedure
Subtask 25-50-00-210-110-A

A. Detailed Inspection of Divider Nets, Door Nets and Net Attachment Points

WARNING: WEAR GLOVES TO AVOID INJURY TO HANDS.

(1) Examine each door and divider net for deterioration and other damage (broken webbing, cuts and broken stitching) (Ref. AMM TASK 25-50-00-200-001).
(2) Make sure that the nets are correctly attached to the net attachment points.
(3) Examine each net attachment point and the adjacent area for cracks, corrosion and other damage.
(4) Examine all single stud fittings of the nets for broken or damaged springs and for correct function.

5. Close-up
Subtask 25-50-00-410-105-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the WARNING NOTICE(S).
(3) Set the light switch to off.
(4) Close the forward and/or aft cargo-compartment door(s) (Ref. AMM TASK 52-30-00-860-002).
(5) Remove the access platform(s).
(6) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.04.02 06:14:20 UTC