Inspection/Check of the Fourth Occupant Seat

TASK 25-11-42-200-001-A
Inspection/Check of the Fourth Occupant Seat

ZONE: 211
FIN: 13MM

1. Reason for the Job
Detailed Inspection of seat structure and attachment
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT

3. Job Set-up
Subtask 25-11-42-860-055-A

A. Not Applicable

4. Procedure
Subtask 25-11-42-210-050-A

A. Inspection Check of the Fourth Occupant Seat
(1) Make sure that the upholstery of the seat is not worn or damaged.
(2) Make sure that the velcro pads on the cushions of the back of the seat and the headrest are in the correct condition.
(3) Make sure that all the bolts that attach the seat have no corrosion and are correctly installed.
(4) Make sure that the seat is not loose and that the fittings are in the correct condition.
(5) Make sure that the control cable of the seat belt is not worn.
(6) Make sure that the seat belt and the buckle are in the correct condition.

[Rev.10 from 2021] 2026.03.31 23:28:02 UTC