DOC AIRBUS | AMM A320FInstallation of Reading Light Lens
TASK 23-73-64-400-802-A
Installation of Reading Light Lens
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 23-73-64-860-051-A ** ON A/C NOT FOR ALL
Subtask 23-73-64-420-052-A ** ON A/C NOT FOR ALL
Subtask 23-73-64-862-054-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:12:39 UTC
Installation of Reading Light Lens
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
Reading Light LensSubtask 23-73-64-860-051-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)
4. Procedure(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)
Subtask 23-73-64-420-052-A ** ON A/C NOT FOR ALL
A. Installation of Reading Light Lens.
(1) Make sure that the related reading light is off.
(2) Clean the component interfaces and the adjacent area.
(3) Do an inspection of the component interfaces and the adjacent area.
(4) Install the new lens (1) on the reading light (2).
(5) Make sure that the lens (1) correctly locks into position.
(6) Make sure that the work area is clean and clear of tools and other items.
Subtask 23-73-64-420-052-B ** ON A/C NOT FOR ALL (1) Make sure that the related reading light is off.
(2) Clean the component interfaces and the adjacent area.
(3) Do an inspection of the component interfaces and the adjacent area.
(4) Install the new lens (1) on the reading light (2).
(5) Make sure that the lens (1) correctly locks into position.
(6) Make sure that the work area is clean and clear of tools and other items.
A. Installation of Reading Light Lens.
(1) Make sure that the related reading light is off.
(2) Clean the component interfaces and the adjacent area.
(3) Do an inspection of the component interfaces and the adjacent area.
(4) Carefully push the suction end (4) of the 8PE455838-00 TOOL-ADJUSTMENT,READING LIGHT (3) onto the new lens (2).
(5) Put the suction end (4) of the 8PE455838-00 TOOL-ADJUSTMENT,READING LIGHT (3) with the lens (2) onto the reading light (1).
(6) Push the lens (2) into the correct position until you hear a click.
(7) Press the pushbutton (5) to release the lens (2).
(8) Make sure that the work area is clean and clear of tools and other items.
5. Close-up(1) Make sure that the related reading light is off.
(2) Clean the component interfaces and the adjacent area.
(3) Do an inspection of the component interfaces and the adjacent area.
(4) Carefully push the suction end (4) of the 8PE455838-00 TOOL-ADJUSTMENT,READING LIGHT (3) onto the new lens (2).
(5) Put the suction end (4) of the 8PE455838-00 TOOL-ADJUSTMENT,READING LIGHT (3) with the lens (2) onto the reading light (1).
(6) Push the lens (2) into the correct position until you hear a click.
(7) Press the pushbutton (5) to release the lens (2).
(8) Make sure that the work area is clean and clear of tools and other items.
Subtask 23-73-64-862-054-A ** ON A/C NOT FOR ALL