Removal of the Cockpit Voice Recorder (CVR) Microphone Amplifier
TASK 23-71-14-000-001-A
Removal of the Cockpit Voice Recorder (CVR) Microphone Amplifier
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 23-71-14-865-050-A ** ON A/C NOT FOR ALL
Subtask 23-71-14-020-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:12:19 UTC
Removal of the Cockpit Voice Recorder (CVR) Microphone Amplifier
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
Subtask 23-71-14-865-050-A ** ON A/C NOT FOR ALL
A. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/CVR/SPLY | 2RK | E14 |
| 49VU | COM/CVR/CTL | 4RK | E13 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/CVR/SPLY | 23RK | E14 |
| 49VU | COM/CVR/CTL | 26RK | E13 |
Subtask 23-71-14-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the CVR Microphone Amplifier
(1) Remove the screws (4) and loosen the fasteners (6) of the lining panel (5) and remove the lining panel.
(2) Remove the screws (1) and loosen the fasteners (3) of the dome light cover (2) and remove the cover.
(3) Disconnect the connectors (7) from the receptacles (9).
(4) Put CAP - BLANKING on the connectors (7) and on the receptacles (9).
(5) Remove the screws (10) and the washers (11).
(6) Remove the CVR microphone amplifier (12) from the support (8).
(1) Remove the screws (4) and loosen the fasteners (6) of the lining panel (5) and remove the lining panel.
(2) Remove the screws (1) and loosen the fasteners (3) of the dome light cover (2) and remove the cover.
(3) Disconnect the connectors (7) from the receptacles (9).
(4) Put CAP - BLANKING on the connectors (7) and on the receptacles (9).
(5) Remove the screws (10) and the washers (11).
(6) Remove the CVR microphone amplifier (12) from the support (8).
CVR Microphone Amplifier