Removal of the Media Server

TASK 23-36-62-000-001-A
Removal of the Media Server

ZONE: 120
FIN: 170MH ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
120	AVIONICS COMPARTMENT
824

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-41-00-010-002-A	Open the Avionics Compartment Doors for Access
Illustration of the media server

3. Job Set-up
Subtask 23-36-62-865-050-A ** ON A/C NOT FOR ALL

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	PES-VIDEO-CONTROL-VCC-DS/C	21MH	C02

Subtask 23-36-62-010-050-A ** ON A/C NOT FOR ALL

B. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at the access door 824 in zone 128.
(2) Open the access door 824 (Ref. AMM TASK 52-41-00-010-002).

4. Procedure
Subtask 23-36-62-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the Media Server
(1) Loosen the nuts (3).
(2) Lower the nuts (3).
(3) Pull the media server (5) on its rack (2) to disconnect the electrical connectors (1).
(4) Remove the media server (5) from its rack (2).
(5) Put CAP - BLANKING on the disconnected electrical connectors (1).

[Rev.10 from 2021] 2026.04.02 06:12:11 UTC