Removal of the In-Flight Entertainment Center (IFEC) Integrated Server

TASK 23-33-37-000-001-A
Removal of the In-Flight Entertainment Center (IFEC) Integrated Server

ZONE: 128
FIN: 311MK ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
128	REAR AVIONIC COMPARTMENT
824

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 52-41-00-010-002-A	Open the Avionics Compartment Doors for Access
IFE Audio/Video Controller

3. Job Set-up
Subtask 23-33-37-861-050-A ** ON A/C NOT FOR ALL

A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

Subtask 23-33-37-010-050-A ** ON A/C NOT FOR ALL

B. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at access door 824 in zone 128.
(2) Open access door 824 (Ref. AMM TASK 52-41-00-010-002).

Subtask 23-33-37-865-054-A ** ON A/C NOT FOR ALL

C. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
123VU	SHED BUS/218XP/220XP SPLY	28XN	AC02

4. Procedure
Subtask 23-33-37-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the IFEC Integrated Server
(1) Loosen the nuts (3).
(2) Lower the nuts (3) off the lugs (4).
(3) Carefully pull the IFEC integrated server (5) out of the rack (2) to disconnect the electrical connectors (1).
(4) Remove the IFEC integrated server (5) from the rack (2).
(5) Put the CAP - BLANKING on the disconnected electrical connectors (1).

[Rev.10 from 2021] 2026.04.02 06:12:07 UTC