Removal of the Passenger Control Unit (PCU)

TASK 23-33-12-000-001-A
Removal of the Passenger Control Unit (PCU)

WARNING: ISOLATE THE ELECTRICAL CIRCUITS FROM THE RELATED EQUIPMENT AND THE ENVIRONMENT.

ZONE: 200
FIN: 200MK ** ON A/C NOT FOR ALL
FIN: 203MK ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
Passenger Control Unit ** ON A/C NOT FOR ALL
Passenger Control Unit ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 23-33-12-861-051-A ** ON A/C NOT FOR ALL

A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

Subtask 23-33-12-865-061-A ** ON A/C NOT FOR ALL

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	PES-MUSIC - CTL	21MK	D01
** ON A/C NOT FOR ALL
2000VU	PES-MUSIC-CABIN AFT-RH	25MK	D05
2000VU	PES-MUSIC-CABIN AFT-LH	22MK	D04
2000VU	PES-MUSIC-CABIN FWD-RH	24MK	D03
2000VU	PES-MUSIC-CABIN FWD-LH	23MK	D02
** ON A/C NOT FOR ALL
2000VU	PES-MUSIC-CTL	21MK	D01

4. Procedure
Subtask 23-33-12-020-051-F ** ON A/C NOT FOR ALL

A. Removal of the Passenger Control Unit (PCU)
(1) Loosen the captive screw (3) from the PCU (1) until the hook (2) is unlocked.
(2) Carefully lift the PCU (1) to get access to the electrical connector(s) (4).
(3) Disconnect the electrical connector(s) (4).
(4) Remove the PCU (1) from the seat armrest.
(5) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.

[Rev.10 from 2021] 2026.04.02 06:12:07 UTC