End of the Flight Test
TASK 23-33-00-720-805-A
End of the Flight Test
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 23-33-00-860-160-A ** ON A/C NOT FOR ALL
Subtask 23-33-00-720-054-A ** ON A/C NOT FOR ALL
Subtask 23-33-00-860-161-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:12:05 UTC
End of the Flight Test
ZONE: 200
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 23-73-00-861-001-A | Energize the Cabin Intercommunication Data System (CIDS) |
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
Subtask 23-33-00-860-160-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft electrical circuits are energized (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the CIDS is energized (Ref. AMM TASK 23-73-00-861-001).
(3) Make sure that the PAX SYS switch on the VCC is in the ON position.
(4) Make sure that the In-Flight Entertainment (IFE) system boot sequence is completed.
Subtask 23-33-00-865-238-A ** ON A/C NOT FOR ALL (1) Make sure that the aircraft electrical circuits are energized (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the CIDS is energized (Ref. AMM TASK 23-73-00-861-001).
(3) Make sure that the PAX SYS switch on the VCC is in the ON position.
(4) Make sure that the In-Flight Entertainment (IFE) system boot sequence is completed.
NOTE: Approximately five minutes are necessary to complete the boot sequence.
(5) Make sure that the aircraft is on the ground and at gate (engines off and door opened). B. Make sure that this(these) circuit breaker(s) is(are) closed:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/CIDS/DIR ESS/2 | 157RH | G02 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/INT/1+2 | 9RN | G08 |
| 49VU | COM/AUDIO/ACP/F/O | 5RN | G07 |
| 49VU | COM/ACP CAPT/SELCAL/INT 1 AUDIO/AVNCS | 4RN | G06 |
| 49VU | COM/CIDS/DEU B/ESS | 153RH | G03 |
| 49VU | COM/CIDS/DIR ESS/1 | 150RH | G01 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM DIR ESS/2 | 157RH | G02 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/DEU A NORM/R FWD | 164RH | M10 |
| 121VU | COM NAV/CIDS/DEU A NORM/L FWD | 163RH | M09 |
| 121VU | COM NAV/CIDS/DEU B/NORM | 162RH | M08 |
| 121VU | COM NAV/CIDS/DIR NORM/2 | 156RH | M06 |
| 121VU | COM NAV/CIDS/DIR NORM/1 | 151RH | M05 |
| 121VU | COM/FAP1/NORM | 170RH | Q14 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/ACP/THIRD/OCCPNT | 6RN | M02 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/DEU A NORM/R FWD | 164RH | M11 |
| 121VU | COM NAV/CIDS/DEU A NORM/L FWD | 163RH | M10 |
| 121VU | COM NAV/CIDS/DIR NORM/2 | 156RH | M07 |
| 121VU | COM NAV/CIDS/DIR NORM/1 | 151RH | M06 |
| 121VU | COM NAV/CIDS/FWD ATTND/PNL | 170RH | Q14 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | IFE-VCC-AC | 21MH | C02 |
| 2000VU | IFE-VCC-DC | 20MH | C01 |
| 2000VU | IFE/SEAT-POWER-PAX SYS | 20MK | D08 |
Subtask 23-33-00-720-054-A ** ON A/C NOT FOR ALL
A. End of Flight Test
5. Close-up| ACTION | RESULT |
|---|---|
NOTE: The steps that follow are applicable for all Rave systems. 1.On removable Display Unit (DU) 11MH, on the "Login/Welcome" page: | NOTE: The steps that follow are applicable for all Rave systems. On removable DU 11MH: |
|
|
| 2.On removable DU 11MH, on the "Maintenance Mode Login" page: | |
| |
| 3.On removable DU 11MH, on the "Maintenance Mode Login" page: | On removable DU 11MH: |
|
|
| 4.On removable DU 11MH: | On removable DU 11MH: |
|
|
| 5.On removable DU 11MH, on the "Maintenance Home" page: | On removable DU 11MH: |
|
|
| 6.On removable DU 11MH, on the "Maintenance Test Mode" page: | On removable DU 11MH: |
|
|
| 7.On removable DU 11MH: | On removable DU 11MH: |
|
|
| 8.On removable DU 11MH, on the "Flight Details" page: | On removable DU 11MH: |
|
|
| 9.On removable DU 11MH, on the "Airport Entry keyboard" page: | |
| |
| 10.On removable DU 11MH, on the "Airport Entry keyboard" page: | On removable DU 11MH: |
|
|
| 11.On removable DU 11MH, on the "Flight Details" page: | On removable DU 11MH: |
|
|
| 12.On removable DU 11MH, on the "Airport Entry keyboard" page: | |
| |
| 13.On removable DU 11MH, on the "Airport Entry keyboard" page: | On removable DU 11MH: |
|
|
| 14.On removable DU 11MH, on the "Flight Details" page: | On removable DU 11MH: |
|
|
| 15.On removable DU 11MH, on the "Flight Details" page: | On removable DU 11MH: |
|
|
| 16.On removable DU 11MH, on the "Entertainment mode" page: | On removable DU 11MH: |
|
|
| 17.On removable DU 11MH, on the "PAX Entertainment options" page: | On removable DU 11MH: |
|
|
| 18.On removable DU 11MH: | On removable DU 11MH: |
|
|
| | NOTE: The step that follows is applicable only for Rave Centric system and Rave mixed system. In the cabin:
|
| 19.On removable DU 11MH: | NOTE: The steps that follow are applicable for all Rave systems. |
|
|
| 20.On removable DU 11MH, on the "Maintenance Test Mode" page: | On removable DU 11MH: |
|
|
| 21.On removable DU 11MH, on the "Maintenance Test Mode" page: | On removable DU 11MH: |
|
|
NOTE: The steps that follow are applicable only for Rave Centric system and Rave mixed system. 22.In the cabin, on some in-seat DUs: | NOTE: The steps that follow are applicable only for Rave Centric system and Rave mixed system. In the cabin, on the related in-seat DUs: |
|
|
| 23.In the cabin, on some in-seat DUs: | In the cabin, on the related in-seat DUs: |
|
|
NOTE: The steps that follow are applicable for all Rave systems. 24.On removable DU 11MH: | NOTE: The steps that follow are applicable for all Rave systems. On removable DU 11MH and on the passenger seats: |
|
|
| 25.On removable DU 11MH: | On removable DU 11MH and on the passenger seats: |
|
|
| | NOTE: The step that follows is applicable only for Rave Centric system and Rave mixed system.
|
NOTE: The step that follows is applicable only for Rave Centric system and Rave mixed system. 26.On removable DU 11MH, on the "Login/Welcome" page: | NOTE: The step that follows is applicable only for Rave Centric system and Rave mixed system. On removable DU 11MH and in the passenger seats: |
|
|
Subtask 23-33-00-860-161-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Push the PAX SYS switch on VCC 10MH.
(2) Make sure that internal light of the PAX SYS switch goes off.
(3) Make sure that the work area is clean and clear of tools and other items.
(4) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).
(1) Push the PAX SYS switch on VCC 10MH.
(2) Make sure that internal light of the PAX SYS switch goes off.
(3) Make sure that the work area is clean and clear of tools and other items.
(4) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).