Start of the Flight Test
TASK 23-33-00-720-804-A
Start of the Flight Test
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 23-33-00-860-158-A ** ON A/C NOT FOR ALL
Subtask 23-33-00-720-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:12:05 UTC
Start of the Flight Test
ZONE: 200
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 23-33-00-600-802-A | Software / Media Download and Configuration of the IFE system |
| TASK 23-73-00-861-001-A | Energize the Cabin Intercommunication Data System (CIDS) |
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
Subtask 23-33-00-860-158-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the Cabin Intercommunication Data System (CIDS) is energized (Ref. AMM TASK 23-73-00-861-001).
(3) Set the PAX SYS switch on the VCC to the ON position.
(4) Make sure that the internal light of the PAX SYS switch comes on.
(5) Wait until the integrated In-Flight Entertainment (IFE) system boot sequence is completed.
Subtask 23-33-00-865-237-A ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the Cabin Intercommunication Data System (CIDS) is energized (Ref. AMM TASK 23-73-00-861-001).
(3) Set the PAX SYS switch on the VCC to the ON position.
(4) Make sure that the internal light of the PAX SYS switch comes on.
(5) Wait until the integrated In-Flight Entertainment (IFE) system boot sequence is completed.
NOTE: Approximately five minutes are necessary to complete the boot sequence.
(6) Make sure that the software and the media are loaded (Ref. AMM TASK 23-33-00-600-802). B. Make sure that this(these) circuit breaker(s) is(are) closed:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/CIDS/DIR ESS/2 | 157RH | G02 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/INT/1+2 | 9RN | G08 |
| 49VU | COM/AUDIO/ACP/F/O | 5RN | G07 |
| 49VU | COM/ACP CAPT/SELCAL/INT 1 AUDIO/AVNCS | 4RN | G06 |
| 49VU | COM/CIDS/DEU B/ESS | 153RH | G03 |
| 49VU | COM/CIDS/DIR ESS/1 | 150RH | G01 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM DIR ESS/2 | 157RH | G02 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/DEU A NORM/R FWD | 164RH | M10 |
| 121VU | COM NAV/CIDS/DEU A NORM/L FWD | 163RH | M09 |
| 121VU | COM NAV/CIDS/DEU B/NORM | 162RH | M08 |
| 121VU | COM NAV/CIDS/DIR NORM/2 | 156RH | M06 |
| 121VU | COM NAV/CIDS/DIR NORM/1 | 151RH | M05 |
| 121VU | COM/FAP1/NORM | 170RH | Q14 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/ACP/THIRD/OCCPNT | 6RN | M02 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/DEU A NORM/R FWD | 164RH | M11 |
| 121VU | COM NAV/CIDS/DEU A NORM/L FWD | 163RH | M10 |
| 121VU | COM NAV/CIDS/DIR NORM/2 | 156RH | M07 |
| 121VU | COM NAV/CIDS/DIR NORM/1 | 151RH | M06 |
| 121VU | COM NAV/CIDS/FWD ATTND/PNL | 170RH | Q14 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | IFE-VCC-AC | 21MH | C02 |
| 2000VU | IFE-VCC-DC | 20MH | C01 |
| 2000VU | IFE/SEAT-POWER-PAX SYS | 20MK | D08 |
Subtask 23-33-00-720-053-A ** ON A/C NOT FOR ALL
A. Start of Flight Test
| ACTION | RESULT |
|---|---|
NOTE: The steps that follow are applicable for all Rave systems. 1.On removable Display Unit (DU) 11MH, on the "Login/Welcome" page: | NOTE: The steps that follow are applicable for all Rave systems. On removable DU 11MH: |
|
|
| 2.On removable DU 11MH, on the "Flight Mode Login" page: | On removable DU 11MH: |
| |
|
|
| 3.On removable DU 11MH, on the "Flight Details" page: | On removable DU 11MH: |
|
|
| 4.On removable DU 11MH, on the "Airport Entry keyboard" page: | |
| |
| 5.On removable DU 11MH, on the "Airport Entry keyboard" page: | On removable DU 11MH: |
|
|
| 6.On removable DU 11MH, on the "Flight Details" page: | On removable DU 11MH: |
|
|
| 7.On removable DU 11MH, on the "Airport Entry keyboard" page: | |
| |
| 8.On removable DU 11MH, on the "Airport Entry keyboard" page: | On removable DU 11MH: |
|
|
| 9.On removable DU 11MH, on the "Flight Details" page: | On removable DU 11MH, on the "Flight Details" page: |
|
|
| 10.On removable DU 11MH: | On removable DU 11MH: |
|
|
| 11.On removable DU 11MH, on the "Entertainment mode" page: | On removable DU 11MH: |
|
|
| 12.On removable DU 11MH, on the "PAX Entertainment options" page: | On removable DU 11MH: |
|
|
| 13.On removable DU 11MH: | On removable DU 11MH: |
|
|
| | NOTE: The steps that follow are applicable only for Rave Centric system and Rave mixed system. In the cabin:
|
NOTE: The steps that follow are applicable only for Rave Centric system and Rave mixed system. NOTE: The steps that follow are applicable only if the DUs are set for the selected configuration. | |
| 14.On removable DU 11MH: | On removable DU 11MH: |
|
|
| 15.On removable DU 11MH: | In the cabin: |
|
|
| 16.On removable DU 11MH: | In the cabin: |
|
|