Operational Test of the Passenger Entertainment System (Music)

TASK 23-33-00-710-002-A
Operational Test of the Passenger Entertainment System (Music)

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 23-33-00-860-002-A	Replacement of the Compact Disks for the Passenger Entertainment System (PES)
TASK 23-73-00-861-001-A	Energize the Cabin Intercommunication Data System (CIDS)
TASK 23-73-00-862-001-A	De-energize the Cabin Intercommunication Data System (CIDS)
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)

3. Job Set-up
Subtask 23-33-00-860-053-F ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the Cabin Intercommunication Data System (CIDS) is energized (Ref. AMM TASK 23-73-00-861-001).
(3) Make sure that the Integrated PRAM-Card is correctly installed.

Subtask 23-33-00-865-162-A ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	COM/INT/1+2	9RN	G08
49VU	COM/AUDIO/ACP/F/O	5RN	G07
49VU	COM/ACP CAPT/SELCAL/INT 1 AUDIO/AVNCS	4RN	G06
49VU	COM/CIDS/DEU B/ESS	153RH	G03
49VU	COM/CIDS/DIR ESS/2	157RH	G02
49VU	COM/CIDS/DIR ESS/1	150RH	G01
121VU	COM NAV/CIDS/DEU A NORM/R FWD	164RH	M10
121VU	COM NAV/CIDS/DEU A NORM/L FWD	163RH	M09
121VU	COM NAV/CIDS/DEU B/NORM	162RH	M08
121VU	COM NAV/CIDS/DIR NORM/2	156RH	M06
121VU	COM NAV/CIDS/DIR NORM/1	151RH	M05
121VU	COM NAV/ACP/THIRD/OCCPNT	6RN	M02
121VU	COM/FAP1/NORM	170RH	Q14
2000VU	PES MUSIC FWD - RH	24MK	D03
2000VU	PES-MUSIC-CABIN-LH	23MK	D02
2000VU	PES MUSIC CTL	21MK	D01

4. Procedure
Subtask 23-33-00-710-052-BJ ** ON A/C NOT FOR ALL

A. Operational Test of the PES

NOTE: Make sure that in the avionics compartment the Compact Disks (CD) are installed in the audio reproducer 10MK (Ref. AMM TASK 23-33-00-860-002).

NOTE: Make sure that the headsets that are used with the Passenger Control Units (PCU) are available.

ACTION	RESULT
1.On the Flight Attendant Panel (FAP) 120RH :	On the FAP 120RH :
push the Audio softkey.	the Audio softkey is highlighted by colour change. the display shows the AUDIO page.
2.On the FAP 120RH, AUDIO/CABIN SETTINGS area:	On the FAP 120RH, AUDIO/CABIN SETTINGS area:
push the PES ON/OFF softkey.	the PES ON/OFF softkey is highlighted by colour change.
3.At each PCU:	At each PCU:
connect the headset to the each PCU and select channels 1 to 7 in turn	the music program is heard from channels 1 to 7 with the headset the related channel comes on, on the PCU channel display
change the audio volume at each selection.	the volume of the music changes.
4.At a PCU in the last seat row of the zone 1:	At the related PCU:
connect a headset to the PCU
select one channel between 1 to 7.	the music program is heard at the related channel with the headset
	the related channel comes on, on the PCU channel display.
5.At a PCU in the first seat row of the zone 2:	At the related PCU:
connect a headset to the PCU
select one channel between 1 to 7.	the music program is heard at the related channel with the headset
	the related channel comes on, on the PCU channel display.
6.At the FWD attendant station:	At the FWD Attendant Indication Panel (AIP):
lift the handset from the cradle	the # symbol comes on
push and hold the PTT pushbutton switch and speak into the headset.	the # symbol goes off.
	In the cabin: the announcement is heard from all the passenger and the lavatory loudspeakers.
	At the headsets of the related PCU: the music program is cancelled and the announcement is heard on channels 1 to 7 with the headset
	the related channel comes on, on the PCU channel display.
7.At the FWD attendant station:	At the forward AIP:
release the PTT pushbutton switch	the # symbol comes on
push the PA and 1/FWD pushbutton switches	the # symbol goes off.
	the PA FWD message comes on.
	In the cabin in the FWD zone:
push and hold the PTT pushbutton switch and speak into the handset.	the announcement is heard in zone 1 from all the passenger and the lavatory loudspeakers.
	At the PCU in the AFT zone: the announcement is not heard,
	the music program of the related channel is heard,
	At the PCU in the FWD zone: the music program is cancelled and the announcement is heard on channels 1 to 7 with the headset.
	the related channel comes on, on the PCU channel display.
8.At the FWD forward attendant station:	At the forward AIP:
release the PTT pushbutton switch	the PA FWD message goes off
push the RESET pushbutton switch	the RST message comes on
release the RESET pushbutton switch	the # symbol comes on
push the PA and 2/AFT pushbutton switch	the # symbol goes off.
	the PA AFT message comes on.
	In the cabin in the AFT zone:
push and hold the PTT pushbutton switch and speak into the handset.	the announcement is heard in zone 2 from all the passenger and the lavatory loudspeakers.
	At the PCU in the FWD zone: the announcement is not heard
	the music program of the related channel is heard.
	At the PCU in the AFT zone: the music program is cancelled and the announcement is heard on channels 1 to 7 with the headset.
	the related channel comes on, on the PCU channel display.
9.At the FWD attendant station door:	At the forward AIP:
release the PTT pushbutton switch	the PA AFT message goes off
push the RESET pushbutton switch	the RST message comes on
release the RESET pushbutton switch	the # symbol comes on
put the handset back into the cradle.	the # symbol goes off.
10.On the FAP 120RH, BORDING MUSIC (BGM)/BGM 1 select area:	On the FAP 120RH, BGM/BGM 1 select area:
push the ON/OFF softkey.	the ON/OFF softkey is highlighted by colour change.
	On the FAP 120RH, BGM aircraft symbol: the last chosen music channel is shown on the BGM 1 channel display.
	In the cabin: the boarding music is heard from all the passenger and the lavatory loudspeakers.
	At the related PCU: the related music channel is heard.
11.On the FAP 120RH, PRERECORDED ANNOUNCEMENT/SELECT area:	On the FAP 120RH, PRERECORDED ANNOUNCEMENT/SELECT area:
set an announcement via up and down triangle softkey.
the set announcement is highlighted by colour change.
12.On the FAP, PRERECORDED ANNOUNCEMENT/SELECT area:	On the FAP, PRERECORDED ANNOUNCEMENT/MENO area:
push the left left-pointing arrow softkey.	the announcement title with the note "FOUND" is shown in the MEMO area.
13.On the FAP, PRERECORDED ANNOUNCEMENT/SELECT area:	On the FAP, PRERECORDED ANNOUNCEMENT:
do the same procedure for approximately seven announcements.	all entered announcements are shown in the MEMO area.
14.On the FAP, PRERECORDED ANNOUNCEMENT/MEMO area:	On the FAP, PRERECORDED ANNOUNCEMENT/MEMO area:
set an announcement via up and down triangle softkey.	the active memo field is highlighted by colur change.
15.On the FAP, PRERECORDED ANNOUNCEMENT/MEMO area:	On the FAP, PRERECORDED ANNOUNCEMENT/ON ANNOUNCE display:
push the Play Next softkey.	the set announcement title moves into the display.
	In the cabin: the related prerecorded announcement is heard from all the passenger and the lavatory loudspeakers.
	At the related PCU: the related prerecorded announcement is heard at all channels with the headset.
	the related channel comes on, on the PCU channel display.
16.At the FWD attendant station:	At the FWD Attendant Indication Panel (AIP):
lift the handset from the cradle.	the # symbol comes on.
push and hold the PTT pushbutton switch and speak into the headset	the # symbol goes off.
	In the cabin: the related prerecorded announcement is cancelled and the announcement from the FWD attendant station is heard from all the passenger and the lavatory loudspeakers.
	At the headsets of the related PCU: the related prerecorded announcement is cancelled and the announcement from the FWD attendant station is heard at all channels with the headset.
	the related channel comes on, on the PCU channel display.
17.In the cockpit on the handset 130RH:	At the AIP 320RH:
lift the handset from the cradle.
push and hold the PTT pushbutton switch and speak into the handset.	the PA ALL IN USE message comes on.
	In the cabin: the announcement from the FWD attendant station is cancelled and the handset announcement from the cockpit is heard from all the passenger and the lavatory loudspeakers.
	At the related PCU: the announcement from the FWD attendant station is cancelled and the handset announcement from the cockpit is heard on channels 1 to 7 with the headset.
	the related channel stay, on the PCU channel display.
18.In the cockpit on the handset 130RH:	At the AIP 320RH:
release the PTT pushbutton switch and put the handset back into the cradle.	the PA ALL IN USE message goes off.
19.At the FWD attendant station:	At the AIP 320RH:
release the PTT pushbutton switch and put the handset back into the cradle.	the # symbol goes off.
20.On the FAP, PRERECORDED ANNOUNCEMENT/MEMO area:	On the FAP, PRERECORDED ANNOUNCEMENT/ON ANNOUNCE area:
push the Stop softkey, before the announcement is completed.	the announcement stops. in the ON ANNOUNCE display the announced title goes out of view.
	In the cabin: the boarding music is heard from all the passenger and the lavatory loudspeakers.
	At the related PCU: the related music channel is heard.
21.On the FAP 120RH, BGM/BGM 1 select area:	On the FAP 120RH, BGM/BGM 1 select area:
push the ON/OFF softkey.	the ON/OFF softkey is highlighted by colour change.
	In the cabin: the boarding music is cancelled from all the passenger and the lavatory loudspeakers.
22.On the FAP 120RH, AUDIO/CABIN SETTINGS area:	On the FAP 120RH, AUDIO/CABIN SETTINGS area:
push the PES ON/OFF softkey.	the PES ON/OFF softkey is highlighted by colour change.
	At the related PCU: disconnect the headsets from the PCU

5. Close-up
Subtask 23-33-00-860-054-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to the serviceable condition.
(1) De-energize the Cabin Intercommunication Data System (CIDS) (Ref. AMM TASK 23-73-00-862-001).
(2) De-energize the aircraft electrical circuit (Ref. AMM TASK 24-41-00-862-002).

[Rev.9 from 2019] 2026.04.02 06:12:07 UTC