W DOC AIRBUS | AMM A320F

Replacement of the Sound Recording Medium of the Prerecorded Announcement and Boarding Music (PRAM) Reproducer


TASK 23-32-00-860-001-A
Replacement of the Sound Recording Medium of the Prerecorded Announcement and Boarding Music (PRAM) Reproducer


FIN: 10RX ** ON A/C NOT FOR ALL
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
824
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 23-32-00-700-001-A
Test of the Prerecorded Announcement Operation of the Prerecorded Announcement and Boarding Music (PRAM) Reproducer
TASK 23-32-00-710-002-A
Test of the Boarding Music Operation of the Prerecorded Announcement and Boarding Music (PRAM) Reproducer
TASK 23-32-00-860-002-A
Initialization of the Prerecorded Announcement and Boarding Music (PRAM) Reproducer
TASK 52-41-00-010-002-A
Open the Avionics Compartment Doors for Access
TASK 52-41-00-410-002-A
Close the Avionics Compartment Doors after Access
3. Job Set-up
Subtask 23-32-00-865-073-A ** ON A/C NOT FOR ALL
A. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
2000VUPRAM2RXE01
Subtask 23-32-00-010-050-A ** ON A/C NOT FOR ALL
B. Get Access
   (1) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at zone 128.
   (2) Open access door 824 (Ref. AMM TASK 52-41-00-010-002).
4. Procedure
Subtask 23-32-00-869-052-B ** ON A/C NOT FOR ALL
A. Replacement of the Audio Cassettes
   (1) Release the quick-release fastener (4) and open the door (3) on the front of the PRAM reproducer (1).
   (2) Remove the audio cassette (2) from the cassette drive.
   (3) Install the new audio cassette (2) in the cassette drive.
NOTE: Make sure that you can see the identification label on the cassette after installation.
   (4) Close the door (3) on the front of the PRAM reproducer (1) and lock the quick- release fastener (4).
Subtask 23-32-00-865-074-A ** ON A/C NOT FOR ALL
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
2000VUPRAM2RXE01
Subtask 23-32-00-860-050-A ** ON A/C NOT FOR ALL
C. Do the initialization procedure (Ref. AMM TASK 23-32-00-860-002)
Subtask 23-32-00-710-056-A ** ON A/C NOT FOR ALL
D. Do the test of the prerecorded announcement/boarding music operation of the PRAM reproducer (Ref. AMM TASK 23-32-00-700-001) and (Ref. AMM TASK 23-32-00-710-002).
5. Close-up
Subtask 23-32-00-410-050-A ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Close access door 824 (Ref. AMM TASK 52-41-00-410-002).
   (3) Remove the access platform(s).
[Rev.10 from 2021] 2026.04.02 06:12:04 UTC