Uploading of the SATCOM SECURE ORT Table

TASK 23-28-00-600-005-A
Uploading of the SATCOM SECURE ORT Table

ZONE: 210
FIN: 105RV1 ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-38-00-610-804-A	Onboard Software Uploading Procedure
TASK 34-10-00-860-004-A	IR Alignment Procedure
TASK 34-10-00-860-004-A-02	IR Alignment Procedure to do a Check of the Links between each FMGC and the three Air Data/Inertial Reference Units (ADIRUs)

3. Job Set-up
Subtask 23-28-00-861-055-A ** ON A/C NOT FOR ALL

A. Energize the Aircraft Electrical Circuits from the External Power (Ref. AMM TASK 24-41-00-861-002).

Subtask 23-28-00-865-103-A ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	AUTO FLT/MCDU/1	11CA1	B01
49VU	L/G/LGCIU/SYS1/NORM	1GA	C09
49VU	FWS/FWC1/SPLY	3WW	F01
121VU	CFDS/CFDIU/SPLY	2TW	J18
121VU	DATA/LOADER/SPLY	3TD	J16
121VU	DLS&/DLRB/SPLY	5TD	J15
121VU	SATCOM	102RV1	K01
121VU	AUTO FLT/MCDU/2	11CA2	N20
121VU	HYDRAULIC/LGCIU/SYS2	2GA	Q35
121VU	EIS/FWC2/SPLY	2WW	Q07

Subtask 23-28-00-860-080-A ** ON A/C NOT FOR ALL

C. Aircraft Maintenance Configuration
(1) Do the IR Alignment Procedure (Ref. AMM TASK 34-10-00-860-004)
(2) Make sure that the aircraft is in the ground configuration.

4. Procedure
Subtask 23-28-00-970-055-A ** ON A/C NOT FOR ALL

A. Uploading of the SATCOM SECURE ORT Table
(1) Upload the SATCOM SECURE ORT table (Ref. AMM TASK 31-38-00-610-804).

Subtask 23-28-00-860-088-A ** ON A/C NOT FOR ALL

B. Open and close circuit breaker 102RV1 to do a reset of the SATCOM system.

Subtask 23-28-00-865-104-A ** ON A/C NOT FOR ALL

C. Table of the circuit breakers used in this procedure:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	SATCOM	102RV1	K01

Subtask 23-28-00-280-055-A ** ON A/C NOT FOR ALL

D. Do a Check of the Identification of the Uploaded SATCOM SECURE ORT Table

ACTION	RESULT
1.On the MCDU (Main Menu): Push the line key adjacent to the SAT indication.	On the MCDU: The SATCOM MAIN MENU page comes into view.
Push the line key adjacent to the SATCOM STATUS indication.	The SATCOM STATUS page comes into view.
Push the line key adjacent to the CONFIG indication.	The SATCOM CONFIG page comes into view.
Push the line key adjacent to the SECURE ORT indication.	The SATCOM SECURE ORT page comes into view.
On the SATCOM SECURE ORT page: Make sure that the ORT reference(s) shown is (are) the same as the reference(s) of the SATCOM SECURE ORT table on the disk(s).

Subtask 23-28-00-280-056-A ** ON A/C NOT FOR ALL

E. On the MCDU, on the SATCOM SECURE ORT page, if the ORT reference(s) is(are) different from the reference(s) of the SATCOM SECURE ORT table shown on the disk(s):
(1) Do the uploading of the SATCOM SECURE ORT table (Subtask 23-28-00-970-05500) with the same version of the SATCOM SECURE ORT table.
(2) Do the reset of the SATCOM system (Subtask 23-28-00-865-07600).
(3) Do a check of the identification of the uploaded SATCOM SECURE ORT table (Subtask 23-28-00-280-05500).

5. Close-up
Subtask 23-28-00-860-081-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to its initial configuration.
(1) On the MCDU, push the line select key adjacent to the RETURN indication until the CFDS menu page comes into view.
(2) Fully decrease the brightness of the MCDU screen (display off).
(3) Put the disk(s) in the storage box. Put the storage box in the aircraft cockpit.

Subtask 23-28-00-862-055-A ** ON A/C NOT FOR ALL

B. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.9 from 2019] 2026.04.02 06:50:18 UTC