Removal of the Radio Management Panel (RMP)

TASK 23-13-13-000-001-A
Removal of the Radio Management Panel (RMP)

ZONE: 210
FIN: 1RG1
FIN: 1RG2
FIN: 1RG3 ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

C. Referenced Information

REFERENCE	DESIGNATION
RMP1 and 2 ** ON A/C NOT FOR ALL
RMP1, 2 and 3 ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 23-13-13-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
FOR FIN: 1RG1 (RMPCOM/NAV FREQ SEL, 1)
49VU	COM/RMP/1	2RG1	G10
FOR FIN: 1RG2 (RMPCOM/NAV FREQ SEL, 2)
121VU	COM NAV/RMP/2	2RG2	L02
** ON A/C NOT FOR ALL
FOR FIN: 1RG3 (RMPCOM FREQ SEL, 3)
121VU	COM NAV/RMP/3	2RG3	L03

4. Procedure
Subtask 23-13-13-020-050-A

A. Removal of the RMP
(1) Loosen the quarter-turn fasteners (1).
(2) Pull the RMP (2) from its housing.
(3) Disconnect the plug (4) from the receptacle (3).
(4) Remove the RMP (2).
(5) Put CAP - BLANKING on the plug (4) and on the receptacle (3).

[Rev.10 from 2021] 2026.03.31 23:12:30 UTC