DOC AIRBUS | AMM A320FInstallation of the Anti-Ice Valve Sense-Lines Assembly
TASK 21-61-41-400-002-A
Installation of the Anti-Ice Valve Sense-Lines Assembly
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 21-61-41-860-052-A ** ON A/C NOT FOR ALL
Subtask 21-61-41-420-051-A ** ON A/C NOT FOR ALL
Subtask 21-61-41-410-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:47:32 UTC
Installation of the Anti-Ice Valve Sense-Lines Assembly
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | Torque wrench: range to between 0.915 and 0.9 m.daN (80.97 and 79.65 lbf.in )  |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.03PBB1) | Lubricant-Anti Seize High Temp. - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| FOR [10HM] (PACK 1-AIR CONDITIONING) | |
| 191BB, 191KB | |
| FOR [11HM] (PACK 2-AIR CONDITIONING) | |
| 192FB, 192KB | |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 12-33-21-618-001-A-01 | Pre-conditioning through the HP Ground Connection |
| TASK 12-33-21-618-001-A-02 | Pre-conditioning with the APU |
| TASK 21-61-00-710-001-A | Operational Test of the Pack Temperature-Control System |
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 53-35-13-000-002-A | Removal of the Quick-Release Access Panels from the Belly Fairing Structure |
| TASK 53-35-13-400-002-A | Installation of the Quick-Release Access Panels on the Belly Fairing Structure |
Anti-Ice Valve Sense-Lines Assembly - Component LocationSubtask 21-61-41-860-052-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft electrical circuits are energized (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the access panel(s) are removed (Ref. AMM TASK 53-35-13-000-002).
(a) FOR [10HM] (PACK 1-AIR CONDITIONING)
(b) FOR [11HM] (PACK 2-AIR CONDITIONING)
Subtask 21-61-41-865-064-A ** ON A/C NOT FOR ALL (1) Make sure that the aircraft electrical circuits are energized (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the access panel(s) are removed (Ref. AMM TASK 53-35-13-000-002).
(a) FOR [10HM] (PACK 1-AIR CONDITIONING)
(b) FOR [11HM] (PACK 2-AIR CONDITIONING)
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| FOR FIN: 10HM (PACK 1AIR CONDITIONING) | |||
| 122VU | AIR COND/PACK TEMP/CTL SYS1/1/115VAC | 1HH | X22 |
| 122VU | AIR COND/PACK TEMP/CTL SYS1/1/28VDC | 3HH | X21 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/1/28VDC | 4HH | Y19 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/1/115VAC | 2HH | Y18 |
| FOR FIN: 11HM (PACK 2AIR CONDITIONING) | |||
| 122VU | AIR COND/PACK TEMP/CTL SYS1/2/115VAC | 21HH | W22 |
| 122VU | AIR COND/PACK TEMP/CTL SYS1/2/28VDC | 23HH | W21 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/2/28VDC | 24HH | Y21 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/2/115VAC | 22HH | Y20 |
Subtask 21-61-41-420-051-A ** ON A/C NOT FOR ALL
A. Installation of the Sense Lines Assembly
(1) Remove the blanking plugs from the disconnected line ends.
(2) Make sure that the parts retained from the removed component are clean and in the correct condition.
(3) Apply a small quantity of Lubricant-Anti Seize High Temp. - (Material No.03PBB1) to the threaded parts of the connectors (2), (4), (5), (6), (7), (11), (12) and (13).
(4) Put the sense lines assembly in position.
(5) At the condensor (14) install the sense line connectors (11), (12), and (13).
(6) At the air cycle machine (1) install the sense line connector (2).
(7) At the anti-ice valve (3) install the sense line connectors (4), (5), (6) and (7).
(8) TORQUE the sense line connectors (2), (4), (5), (6), (7), (11), (12) and (13) to between 0.915 and 0.9 m.daN (80.97 and 79.65 lbf.in ).
Subtask 21-61-41-420-051-B ** ON A/C NOT FOR ALL (1) Remove the blanking plugs from the disconnected line ends.
(2) Make sure that the parts retained from the removed component are clean and in the correct condition.
(3) Apply a small quantity of Lubricant-Anti Seize High Temp. - (Material No.03PBB1) to the threaded parts of the connectors (2), (4), (5), (6), (7), (11), (12) and (13).
(4) Put the sense lines assembly in position.
(5) At the condensor (14) install the sense line connectors (11), (12), and (13).
(6) At the air cycle machine (1) install the sense line connector (2).
(7) At the anti-ice valve (3) install the sense line connectors (4), (5), (6) and (7).
(8) TORQUE the sense line connectors (2), (4), (5), (6), (7), (11), (12) and (13) to between 0.915 and 0.9 m.daN (80.97 and 79.65 lbf.in )
. A. Installation of the Sense Lines Assembly
(1) Remove the blanking plugs from the disconnected line ends.
(2) Make sure that the parts retained from the removed component are clean and in the correct condition.
(3) Apply a small quantity of Lubricant-Anti Seize High Temp. - (Material No.03PBB1) to the threaded parts of the connectors (2), (4), (6), (7), (8), (9), (10), (11), (12) and (13).
(4) Put the sense lines assembly in position.
(5) At the condensor (14) install the sense line connectors (11), (12), and (13).
(6) At the air cycle machine (1) install the sense line connector (2).
(7) At the anti-ice valve (3) install the sense line connectors (7), (8), (9) and (10).
(8) At the solenoid (5) install the sense line connectors (4) and (6).
(9) TORQUE the sense line connectors (2), (4), (5), (6), (7), (8), (9), (10), (11), (12) and (13) to between 0.915 and 0.9 m.daN (80.97 and 79.65 lbf.in ).
Subtask 21-61-41-865-065-A ** ON A/C NOT FOR ALL (1) Remove the blanking plugs from the disconnected line ends.
(2) Make sure that the parts retained from the removed component are clean and in the correct condition.
(3) Apply a small quantity of Lubricant-Anti Seize High Temp. - (Material No.03PBB1) to the threaded parts of the connectors (2), (4), (6), (7), (8), (9), (10), (11), (12) and (13).
(4) Put the sense lines assembly in position.
(5) At the condensor (14) install the sense line connectors (11), (12), and (13).
(6) At the air cycle machine (1) install the sense line connector (2).
(7) At the anti-ice valve (3) install the sense line connectors (7), (8), (9) and (10).
(8) At the solenoid (5) install the sense line connectors (4) and (6).
(9) TORQUE the sense line connectors (2), (4), (5), (6), (7), (8), (9), (10), (11), (12) and (13) to between 0.915 and 0.9 m.daN (80.97 and 79.65 lbf.in )
. B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 21-61-41-710-051-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| FOR FIN: 10HM (PACK 1AIR CONDITIONING) | |||
| 122VU | AIR COND/PACK TEMP/CTL SYS1/1/115VAC | 1HH | X22 |
| 122VU | AIR COND/PACK TEMP/CTL SYS1/1/28VDC | 3HH | X21 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/1/28VDC | 4HH | Y19 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/1/115VAC | 2HH | Y18 |
| FOR FIN: 11HM (PACK 2AIR CONDITIONING) | |||
| 122VU | AIR COND/PACK TEMP/CTL SYS1/2/115VAC | 21HH | W22 |
| 122VU | AIR COND/PACK TEMP/CTL SYS1/2/28VDC | 23HH | W21 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/2/28VDC | 24HH | Y21 |
| 122VU | AIR COND/PACK TEMP CTL SYS2/2/115VAC | 22HH | Y20 |
C. Leak and Operational Test of the Sense Lines Assembly
(1) Do the pre-conditioning through the HP ground connector or with the APU (Ref. AMM TASK 12-33-21-618-001) (Ref. AMM TASK 12-33-21-618-001).
(2) Do a leak check of the anti-ice valve sense line connections at the anti-ice valve (7), the air cycle machine (2) and the condensor (7).
(4) Do the operational test of the pack temperature control system (Ref. AMM TASK 21-61-00-710-001).
5. Close-up(1) Do the pre-conditioning through the HP ground connector or with the APU (Ref. AMM TASK 12-33-21-618-001) (Ref. AMM TASK 12-33-21-618-001).
(2) Do a leak check of the anti-ice valve sense line connections at the anti-ice valve (7), the air cycle machine (2) and the condensor (7).
NOTE: Leaks are not permitted.
(3) After approx. 15 minutes stop the pre-conditioning (Ref. AMM TASK 12-33-21-618-001) (Ref. AMM TASK 12-33-21-618-001). (4) Do the operational test of the pack temperature control system (Ref. AMM TASK 21-61-00-710-001).
Subtask 21-61-41-410-053-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the access panel(s) (Ref. AMM TASK 53-35-13-400-002).
(a) FOR [10HM] (PACK 1-AIR CONDITIONING)
(b) FOR [11HM] (PACK 2-AIR CONDITIONING)
Subtask 21-61-41-862-051-A ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the access panel(s) (Ref. AMM TASK 53-35-13-400-002).
(a) FOR [10HM] (PACK 1-AIR CONDITIONING)
(b) FOR [11HM] (PACK 2-AIR CONDITIONING)