Attachment and Linkage Components - Repair/Replacement

TASK 21-61-00-300-001-A
Attachment and Linkage Components - Repair/Replacement

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
Attachment and Linkage Components - Ram Air Inlet

3. Job Set-up
Subtask 21-61-00-860-054-A

A. Aircraft Maintenance Configuration
(1) Make sure that you can get access to the components for which repair or replacement is necessary.

4. Procedure
Subtask 21-61-00-350-051-B

A. Replacement of a Shouldered Bushing - Ram Air Inlet
(1) Use an applicable method and remove the shouldered bushing (4) from the lever (12) or the bracket (17).
(a) Use an applicable method and install the shouldered bushing (4) in the lever (12) or the bracket (17).

NOTE: Make sure that you do not distort or damage the lever or the bracket when you do this.

(b) The procedure is the same for the shouldered bushing (5).

Subtask 21-61-00-350-052-B

B. Replacement of a Bushing or Spacer - Ram Air Inlet
(1) Use an applicable method and remove the bushing (3) or the spacer (6) from the bracket (15) or the lever (12).
(a) Use an applicable method and install the bushing (3) or the spacer (6) in the bracket (15) or the lever (12).

NOTE: Make sure that:

you do not distort or damage the bracket or the lever when you do this.
the ends of the bushing (3) are flush with the sides of the bracket (15).
you have the 1.0 mm (0.0394 in.) dimension 'A' at one end of the spacer (6).

[Rev.10 from 2021] 2026.04.02 06:11:37 UTC