Cleaning of Temperature Sensor

TASK 21-61-00-100-801-A
Cleaning of Temperature Sensor

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 191
ZONE: 192
FIN: 11HH
FIN: 12HH
FIN: 13HH
FIN: 15HH ** ON A/C NOT FOR ALL
FIN: 31HH
FIN: 32HH
FIN: 34HH
FIN: 35HH ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	BRUSH - BRISTLED, SOFT

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BBG1)	Non Aqueous Cleaner-- Denatured Ethyl Alcohol -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
191	AIR CONDITIONING COMPT AND FAIRINGS
192	AIR CONDITIONING COMPT AND FAIRINGS

D. Referenced Information

REFERENCE	DESIGNATION
FOR [11HH] (SENSOR-WATER EXTRACTOR TEMPERATURE)
FOR [31HH] (SENSOR-WATER EXTRACTOR TEMPERATURE)
TASK 21-61-13-000-001-A	Removal of the Water-Extractor Temperature Sensors
TASK 21-61-13-400-001-A	Installation of the Water-Extractor Temperature Sensors
FOR [12HH] (SENSOR-COMPRESSOR TEMPERATURE)
FOR [32HH] (SENSOR-COMPRESSOR TEMPERATURE)
TASK 21-61-11-000-001-A	Removal of the Compressor Outlet - Temperature Sensor
TASK 21-61-11-400-001-A	Installation of the Compressor Outlet - Temperature Sensor
FOR [13HH] (SENSOR-PACK OUTLET TEMP)
FOR [34HH] (SENSOR-PACK OUTLET TEMP)
TASK 21-61-15-000-001-A	Removal of the Pack Outlet - Temperature Sensors
TASK 21-61-15-400-001-A	Installation of the Pack Outlet - Temperature Sensors
FOR [15HH] (SENSOR-COMPRESSOR OVHT)
FOR [35HH] (SENSOR-COMPRESSOR OVHT)
TASK 21-61-12-000-001-A	Removal of the Compressor Overheat - Temperature Sensor
TASK 21-61-12-400-001-A	Installation of the Compressor Overheat - Temperature Sensor

3. Job Set-up
Subtask 21-61-00-020-054-A ** ON A/C NOT FOR ALL

A. Removal of the Temperature Sensor
(1) FOR [12HH] (SENSOR-COMPRESSOR TEMPERATURE), [32HH] (SENSOR-COMPRESSOR TEMPERATURE)
(a) Remove the temperature sensor (Ref. AMM TASK 21-61-11-000-001).
(2) FOR [11HH] (SENSOR-WATER EXTRACTOR TEMPERATURE), [31HH] (SENSOR-WATER EXTRACTOR TEMPERATURE)
(a) Remove the temperature sensor (Ref. AMM TASK 21-61-13-000-001).
(3) FOR [13HH] (SENSOR-PACK OUTLET TEMP), [34HH] (SENSOR-PACK OUTLET TEMP)
(a) Remove the temperature sensor (Ref. AMM TASK 21-61-15-000-001).
(4) FOR [15HH] (SENSOR-COMPRESSOR OVHT), [35HH] (SENSOR-COMPRESSOR OVHT)
(a) Remove the temperature sensor (Ref. AMM TASK 21-61-12-000-001).

Subtask 21-61-00-020-054-B ** ON A/C NOT FOR ALL

4. Procedure
Subtask 21-61-00-100-051-A

A. Cleaning of the Temperature Sensor
(1) Make sure that the temperature sensor is clean and in the correct condition:
(a) Clean the temperature sensor with Non Aqueous Cleaner-- Denatured Ethyl Alcohol - (Material No.08BBG1) , a clean Textile-Lint free Cotton - (Material No.14SBA1) and a BRUSH - BRISTLED, SOFT.

5. Close-up
Subtask 21-61-00-420-052-A ** ON A/C NOT FOR ALL

A. Installation of the Temperature Sensor
(1) FOR [12HH] (SENSOR-COMPRESSOR TEMPERATURE), [32HH] (SENSOR-COMPRESSOR TEMPERATURE)
(a) Install the temperature sensor (Ref. AMM TASK 21-61-11-400-001).
(2) FOR [11HH] (SENSOR-WATER EXTRACTOR TEMPERATURE), [31HH] (SENSOR-WATER EXTRACTOR TEMPERATURE)
(a) Install the temperature sensor (Ref. AMM TASK 21-61-13-400-001).
(3) FOR [13HH] (SENSOR-PACK OUTLET TEMP), [34HH] (SENSOR-PACK OUTLET TEMP)
(a) Install the temperature sensor (Ref. AMM TASK 21-61-15-400-001).
(4) FOR [15HH] (SENSOR-COMPRESSOR OVHT), [35HH] (SENSOR-COMPRESSOR OVHT)
(a) Install the temperature sensor (Ref. AMM TASK 21-61-12-400-001).

Subtask 21-61-00-420-052-B ** ON A/C NOT FOR ALL

[Rev.10 from 2021] 2026.04.02 06:11:37 UTC