Remove Condenser for in Shop Leak Check

TASK 21-52-00-790-001-A
Remove Condenser for in Shop Leak Check

NOTE: This test is to check the integrity of the internal tubes in the condenser. The test can not be done on the line. The condenser must be returned to the maintenance shop or to the vendor.

ZONE: 191
ZONE: 192
FIN: 10HM2
FIN: 11HM2

1. Reason for the Job
Refer to the MPD TASK: 215200-04
REMOVE CONDENSER FOR IN SHOP LEAK CHECK
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
191	AIR CONDITIONING COMPT AND FAIRINGS
192	AIR CONDITIONING COMPT AND FAIRINGS

C. Referenced Information

REFERENCE	DESIGNATION
TASK 21-52-32-000-001-A	Removal of the Condenser
TASK 21-52-32-400-001-A	Installation of the Condenser
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)

3. Job Set-up
Subtask 21-52-00-861-057-A

A. Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002).

Subtask 21-52-00-865-063-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
FOR FIN: 10HM2 (CONDENSER)
49VU	AIR COND/TEMP CTL/SYS 1 CHAN B/28VDC	52HH	D08
** ON A/C NOT FOR ALL
122VU	AIR COND/PACK TEMP/CTL SYS1/1/115VAC	1HH	X22
122VU	AIR COND/PACK TEMP/CTL SYS1/1/28VDC	3HH	X21
122VU	AIR COND/PACK TEMP CTL SYS2/1/28VDC	4HH	Y19
122VU	AIR COND/PACK TEMP CTL SYS2/1/115VAC	2HH	Y18
** ON A/C NOT FOR ALL
122VU	AIR COND/TEMP CTL SYS 1/CHAN A/115VAC	49HH	X22
122VU	AIR COND/TEMP CTL SYS 1/CHAN A/28VDC	51HH	X21
122VU	AIR COND/TEMP CTL SYS 1/CHAN B/115VAC	50HH	Y18
** ON A/C NOT FOR ALL
FOR FIN: 11HM2 (CONDENSER)
122VU	AIR COND/PACK TEMP/CTL SYS1/2/115VAC	21HH	W22
122VU	AIR COND/PACK TEMP/CTL SYS1/2/28VDC	23HH	W21
122VU	AIR COND/PACK TEMP CTL SYS2/2/28VDC	24HH	Y21
122VU	AIR COND/PACK TEMP CTL SYS2/2/115VAC	22HH	Y20
** ON A/C NOT FOR ALL
122VU	AIR COND/TEMP CTL SYS 2/CHAN A/115VAC	53HH	W22
122VU	AIR COND/TEMP CTL SYS 2/CHAN A/28VDC	55HH	W21
122VU	AIR COND/TEMP CTL SYS 2/CHAN B/28VDC	56HH	Y21
122VU	AIR COND/TEMP CTL SYS 2/CHAN B/115VAC	54HH	Y20

Subtask 21-52-00-010-065-A

DELETED

4. Procedure
Subtask 21-52-00-020-050-A

A. Remove the condenser (Ref. AMM TASK 21-52-32-000-001).

Subtask 21-52-00-790-050-A

B. Leak Test
(1) Send the condenser to the workshop.

Subtask 21-52-00-420-050-A

C. Install a new or a serviceable condenser (Ref. AMM TASK 21-52-32-400-001).

5. Close-up
Subtask 21-52-00-410-063-A

DELETED

Subtask 21-52-00-865-083-A

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
FOR FIN: 10HM2 (CONDENSER)
49VU	AIR COND/TEMP CTL/SYS 1 CHAN B/28VDC	52HH	D08
** ON A/C NOT FOR ALL
122VU	AIR COND/PACK TEMP/CTL SYS1/1/115VAC	1HH	X22
122VU	AIR COND/PACK TEMP/CTL SYS1/1/28VDC	3HH	X21
122VU	AIR COND/PACK TEMP CTL SYS2/1/28VDC	4HH	Y19
122VU	AIR COND/PACK TEMP CTL SYS2/1/115VAC	2HH	Y18
** ON A/C NOT FOR ALL
122VU	AIR COND/TEMP CTL SYS 1/CHAN A/115VAC	49HH	X22
122VU	AIR COND/TEMP CTL SYS 1/CHAN A/28VDC	51HH	X21
122VU	AIR COND/TEMP CTL SYS 1/CHAN B/115VAC	50HH	Y18
** ON A/C NOT FOR ALL
FOR FIN: 11HM2 (CONDENSER)
122VU	AIR COND/PACK TEMP/CTL SYS1/2/115VAC	21HH	W22
122VU	AIR COND/PACK TEMP/CTL SYS1/2/28VDC	23HH	W21
122VU	AIR COND/PACK TEMP CTL SYS2/2/28VDC	24HH	Y21
122VU	AIR COND/PACK TEMP CTL SYS2/2/115VAC	22HH	Y20
** ON A/C NOT FOR ALL
122VU	AIR COND/TEMP CTL SYS 2/CHAN A/115VAC	53HH	W22
122VU	AIR COND/TEMP CTL SYS 2/CHAN A/28VDC	55HH	W21
122VU	AIR COND/TEMP CTL SYS 2/CHAN B/28VDC	56HH	Y21
122VU	AIR COND/TEMP CTL SYS 2/CHAN B/115VAC	54HH	Y20

Subtask 21-52-00-862-056-A

C. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tools and other items.
(2) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.02 06:11:24 UTC