Reactivation of the Extract Fan
TASK 21-26-00-440-007-A
Reactivation of the Extract Fan
1. Reason for the Job
MMEL 21-26-02B
AVIONICS EXTRACT FAN
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 21-26-00-869-109-A
Subtask 21-26-00-440-056-A
Subtask 21-26-00-941-095-A
[Rev.10 from 2021]
2026.04.02 06:47:55 UTC
Reactivation of the Extract Fan
1. Reason for the Job
MMEL 21-26-02B
AVIONICS EXTRACT FAN
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
Subtask 21-26-00-869-109-A
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
4. Procedure(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 21-26-00-440-056-A
A. Conditioned Air Inlet Valve
(1) Make sure that the operation of avionics equipment ventilation with electrical ground power, has the time limits that follow:
5. Close-up(1) Make sure that the operation of avionics equipment ventilation with electrical ground power, has the time limits that follow:
- outside air temperature 38 deg.C or less, no time limit
- outside air temperature 45 deg.C, maximum of 3 hours
- outside air temperature 55 deg.C, maximum of thirty five minutes.
- Push the EXTRACT pushbutton switch (the OVRD legend goes off).
Subtask 21-26-00-941-095-A
A. Aircraft Maintenance Configuration
(1) Remove the WARNING NOTICE(S).
Subtask 21-26-00-862-074-A (1) Remove the WARNING NOTICE(S).