70-24 (PW11) - REMOVAL/INSTALLATION

70-24-00 (PW11) - REMOVAL/INSTALLATION

PB.201 CONF:[21] REMOVAL/INSTALLATION - MAINTENANCE PRACTICES
- 70-24-00-910-818-A [PW11] [10]
  Replacement of the Oversize Studs
- 70-24-00-910-801-A [PW11] [10]
  SPOP 427 - Application of Penetrating Oils for Disassembly
- 70-24-00-910-802-A [PW11] [10]
  PWA 357 - Removal of Rivets
- 70-24-00-910-803-A [PW11] [10]
  SPOP 415 - Installation of Helical Coil Threaded Inserts
- 70-24-00-910-804-A [PW11] [10]
  SPOP 416 - Removal of the Broken Bolts or Studs
- 70-24-00-910-805-A [PW11] [10]
  Replacement of Damaged Tube Nuts and Thrust Wires
- 70-24-00-910-806-A [PW11] [10]
  PWA 315 - Standard Torque Recommendations
- 70-24-00-910-807-A [PW11] [10]
  PWA 318 - Key Washer (Tab-Type) Installation
- 70-24-00-910-808-A [PW11] [10]
  Installation of the Packings and Seals
- 70-24-00-910-809-A [PW11] [10]
  PWA 316 - Cotter Pin Installation
- 70-24-00-910-810-A [PW11] [10]
  Installation of the Retaining Rings
- 70-24-00-910-811-A [PW11] [10]
  Assembly - PWA 316 - Safety Wire (Lockwire) Installation
- 70-24-00-910-812-A [PW11] [10]
  SPOP 426 - Tube Installation Procedures
- 70-24-00-910-813-A [PW11] [10]
  Assembly - PWA 316 - Safety Cable Installation