53-31 MAIN STRUCTURE

53-31-00 MAIN STRUCTURE

PB.001 MAIN STRUCTURE - DESCRIPTION AND OPERATION
PB.401 MAIN STRUCTURE - DEACTIVATION/REACTIVATION
- 53-31-00-440-802-A [10]
  Repair of the Filler Panels of the Emergency-Exit Hatch Frame
PB.601 MAIN STRUCTURE - INSPECTION/CHECK
- 53-31-00-220-816-A [10]
  Detailed Inspection of Frame Flanges between Stringer 12 and Stringer 21, LH/RH
- 53-31-00-220-817-A [10]
  Detailed Inspection of Longitudinal Beam Flange at Stringer 20A LH and Stringer 20A RH
- 53-31-00-280-801-A [10]
  Special Detailed Inspection of Upper Skin of Longitudinal Lap Joints, Including Crack Stopper Areas, at Stringer 6 between FR35.8 and FR47, External Surface, LH/RH
- 53-31-00-210-003-A [10]
  Detailed Inspection of MLG Bay Fuselage Side Panels inside MLG Bay, between FR42 and FR46, including Slanted Frames and Side Box, LH/RH
- 53-31-00-210-005-A [10]
  Detailed Inspection of Upper Surfaces of Pressure Deck Membranes and Side Boxes, between FR42 and FR46, including Connections to Longitudinal Beams...
- 53-31-00-210-006-A [10]
  Detailed Inspection of Lower Surface of Pressure Deck Membranes, between FR 42 and FR 46, Including Connections to Longitudinal Beams, Side Boxes, ...
- 53-31-00-210-007-A [10]
  Detailed Inspection of Keelbeam Box
- 53-31-00-210-008-A [10]
  Detailed Inspection of Pressure Bulkhead at FR46, Aft Face, including Vertical Beams, above Cargo Floor Level
- 53-31-00-210-009-A [10]
  Detailed Inspection of Internal Structure around Emergency Exit Cutouts, between FR 37 and FR 41, Both Sides, from Stringer 10 to Stringer 23, LH/RH
- 53-31-00-210-010-A [10]
  Detailed Inspection of Skin around Anti-Collision Light Cutout, between FR40 and FR41 and between Stringer 1, LH/RH, External Surface
- 53-31-00-210-011-A [10]
  Detailed Inspection of Skin around ADF-1 Antenna Cutout, between FR44 and FR45 and between Stringer 1, LH/RH, External Surface
- 53-31-00-210-012-A [10]
  Detailed Inspection of Pressure Bulkhead Forward Face
- 53-31-00-210-014-A [10]
  Detailed Inspection of Hinge and Actuator Fittings for MLG Doors at Keelbeam
- 53-31-00-210-016-A [10]
  Detailed Inspection of Emergency Exit Skin Cutouts, Upper and Lower Corners, LH/RH
- 53-31-00-210-020-A [10]
  Detailed Inspection of Visible Part of Window Forgings and Fuselage Skin in Window Forging Area, LH/RH, External Surface
- 53-31-00-210-023-A [10]
  General Visual Inspection of Main Landing Gear Bay including Main Landing Gear Door Hinges
- 53-31-00-210-025-A [10]
  Detailed Inspection of Fuselage Skin, between FR35 and FR36 and between Stringer 25 and Stringer 30, LH/RH, External Surface
- 53-31-00-210-027-A [10]
  Detailed Visual Inspection of Lower Skin of Longitudinal Lap Joint at Stringer 18 LH and Stringer 18 RH, in Runout Area at FR42, Internal
- 53-31-00-210-028-A [10]
  Detailed Inspection of Frame Flanges and Longitudinal Beam Flange
- 53-31-00-210-029-A [10]
  Detailed Visual Inspection of Side Box Beam in Area of Attachment to FR46, LH/RH
- 53-31-00-210-030-A [10]
  Detailed Visual Inspection of Frame Attachments to Pressure Floor from FR42 to FR46, LH/RH
- 53-31-00-210-809-A [10]
  General Visual Inspection of Emergency Exits Skin Cutouts, Upper and Lower Corners, LH/RH
- 53-31-00-220-001-A [10]
  Special Detailed Inspection (US and HFEC) of Actuator Fitting for MLG Doors at Keel Beam, LH/RH
- 53-31-00-220-813-A [10]
  Special Detailed Inspection (HFEC) of the Keel Beam MLG Door FWD Hinge Fitting, LH/RH
- 53-31-00-220-003-A [10]
  Special Detailed Inspection (HFEC) of Upper Flange of Longitudinal Floor Beams at FR 42 and FR 46, as far as Visible
- 53-31-00-220-004-A [10]
  Special Detailed Inspection (HFEC) of Lower Skin of Longitudinal Lap Joint at Stringer 18LH and Stringer 18RH, in Runout Area at FR42, Internal
- 53-31-00-220-006-A [10]
  Special Detailed Inspection (LFEC) of Splice Plate at Circumferential Skin Splice
- 53-31-00-220-007-A [10]
  Special Detailed inspection of Keel Beam Box Elliptical Cutout at FR46, LH/RH
- 53-31-00-210-031-A [10]
  General Visual Inspection of Fuselage Internal Structure below Cabin Floor Panels, including Cabin Floor Structure between FR36 and FR46
- 53-31-00-210-033-A [10]
  General Visual Inspection of Emergency Exit Skin Cutouts, Upper and Lower Corners, LH/RH
- 53-31-00-210-037-A [10]
  General Visual Inspection of Lower Skin of Longitudinal Lap Joints in Crack Stopper Areas at STGR18 LH/RH, between FR35 and FR47/54, External Surface
- 53-31-00-210-038-A [10]
  General Visual Inspection of Fuselage External Surface, between stringer 23, LH/RH to Crown Centerline, Except Areas Covered by Belly Fairing
- 53-31-00-210-039-A [10]
  General Visual Inspection of Fuselage Internal Structure between FR35(FR35.8) and FR47, above Cabin Floor Level
- 53-31-00-210-044-A [10]
  Special Detailed Inspection (HFEC) of Riveted Area of Keel Beam Side Panel at Attachment to Center Wing Box, LH/RH, Area A
- 53-31-00-210-044-A-01 [10]
  Special Detailed Inspection (HFEC) of Riveted Area of Keel Beam Side Panel at Attachment to Center Wing Box, LH/RH, Area B
- 53-31-00-210-802-A [10]
  Detailed Inspection of Connection Plates at FR43, (Excluding Lateral Outer Part of Connection Plates) Between Y=+/-254 mm, and Between Y=+765 mm and....
- 53-31-00-220-802-A [10]
  Special Detailed Inspection (LFEC) of Longitudinal Beams Flanges at Attachment Area to Pressure Deck Membrane Between FR42 and FR46 and Side Box Flange...
- 53-31-00-220-803-A [10]
  Special Detailed Inspection (HFEC) of Upper Surface of Pressure Deck Membranes and Side Boxes, between FR42 and FR46, at Connections to Longitudinal Beams...
- 53-31-00-220-804-A [10]
  Special Detailed Inspection (LFEC and ROTO) of Pressure Deck Membrane Upper Surface to Center Wing Box, under Titanium Angle Connection and Corner...
- 53-31-00-220-805-A [10]
  Special Detailed Inspection (HFEC) of Frame Forward Face to Pressure Bulkhead Attachments, around Rivets and Holes between STR28 and STR31, LH/RH
- 53-31-00-220-806-A [10]
  Detailed Inspection of Pressure Bulkhead, Aft Face, Lower Part of Vertical Struts (200 mm from bottom) at Y= +/-765 mm (2 places)
- 53-31-00-220-807-A [10]
  Special Detailed Inspection (LFEC) of Angle Fitting Forward Attachment at FR36 at STGR30 LH/RH
- 53-31-00-220-809-A [10]
  Special Detailed Inspection of Stringer Coupling from Stringer 10 LH/RH to Crown Center Line, FWD and Aft FR 47, Internal Surface
- 53-31-00-210-807-A [10]
  General Visual Inspection of Pressure Bulkhead Aft Face and Lower Skin of Pressure Deck Lower Surface
- 53-31-00-250-801-A [10]
  Special Detailed Inspection (HFEC) of Stringer Coupling from Stringer 10 LH/RH to Crown Center Line, FWD and AFT FR47, Internal Surface
- 53-31-00-220-810-A [10]
  Detailed Inspection of Ti-Angle Connection between Belly Fairing and Keel Beam Side Panel FR40 to FR42, LH/RH
- 53-31-00-220-811-A [10]
  Detailed Inspection of the Emergency Exit Hatch-Frame (Internal)
- 53-31-00-220-812-A [10]
  Special Detailed Inspection (LFEC) of Lower Skin of Longitudinal Lap Joints at Stringer 18, between FR 35 (A319/A320) and FR 47 (A320)/ FR 47/51 (A319) ...
- 53-31-00-220-814-A [10]
  Special Detailed Inspection (LFEC) of Internal Structure around Emergency Exit Cutouts, between FR 37 and FR 41, from Stringer 10 to Stringer 23, LH/RH
- 53-31-00-210-002-A [8]
  Detailed Inspection of Pressure Bulkhead at FR46, FWD Face
- 53-31-00-210-004-A [8]
  Detailed Inspection of MLG Bay Fuselage Side Panels, Outboard Face, between FR42 and FR47, from STGR26 to STGR36, LH/RH
- 53-31-00-210-013-A [8]
  Detailed Inspection of Pressure Bulkhead AFT Face at FR35 and the Lower Skin of Pressure Deck Lower Surface, between FR35 and FR36
- 53-31-00-210-018-A [8]
  Detailed Inspection of Skin in Circumferential Splice and Stringer Coupling Area at FR35, from STGR10, LH/RH to Crown Centerline, External Surface
- 53-31-00-210-019-A [8]
  Detailed Inspection of Skin in Circumferential Splice and Stringer Coupling Area at FR47, from STGR10, LH/RH to Crown Centerline, External Surface
- 53-31-00-220-815-A [9]
  Special Detailed Inspection (HFEC and ROTO) of Stringer Coupling from Stringer 10 LH/RH to Crown Center Line, FWD and Aft FR 47, Internal Surface
PB.701 MAIN STRUCTURE - CLEANING/PAINTING
- 53-31-00-916-001-A [10]
  Apply Type I Grade 2 or 3 Temporary Protection to Pressure Bulkhead AFT Face at FR35 and Bottom Surface of Pressure Deck between FR35 and FR36.
- 53-31-00-916-002-A [8]
  Apply Type I Grade 2 or 3 Temporary Protection to fuselage internal structure below cabin floor panels, including cabin floor structure between FR36 and FR46