DOC AIRBUS | AMM A320FELECTRICAL HARNESS - DESCRIPTION AND OPERATION
** ON A/C NOT FOR ALL
1. General
The engine electrical harness interconnects the electrical components mounted in the nacelle. It distributes the power required by the electrical system and transmits signals for:
** ON A/C NOT FOR ALL The engine electrical harness interconnects the electrical components mounted in the nacelle. It distributes the power required by the electrical system and transmits signals for:
- nacelle sub-systems,
- engine control and monitoring functions.
2. Description
Harness - LH Side of EngineA. Fan Harnesses
The electrical cables and harness on the fan case interface with the fan electrical junction box.
The fan harnesses provide electrical power to the control and electrical monitoring systems located on the fan case and the accessory gearbox.
The electrical cables and harness on the fan case interface with the fan electrical junction box.
The fan harnesses provide electrical power to the control and electrical monitoring systems located on the fan case and the accessory gearbox.
(1) Electrical harness
The electrical harness supplies power to, or transmits power from:
The electrical harness supplies power to, or transmits power from:
- the fuel system: filter clogging indication
- the oil system: oil quantity, low oil pressure, oil filter clogging, oil temperature, oil pressure
- N1 system
- N2 system
- N1 bearing accelerometer
- the hydraulic pumps system: by-pass valve, low pressure caution
- the fan compartment fire detection system
- the HP fuel shut off valve solenoid
- the air intake anti-ice system: anti-ice valve position indicating
- the IDG control and indicating (Ref. AMM D/O 24-00-00-00)
- the ignition exciter
- the interphone ground jack (which is located at the engine air intake)
- T12 sensors (located on the air intake).
(2) ECU Control Harnesses
Ref. 73-00-00.
Ref. 73-00-00.
(3) IDG feeders
The IDG transmits the electrical power to the systems via the feeders.
The IDG transmits the electrical power to the systems via the feeders.
B. Core Harness
The electrical harness in the core area interfaces with the junction box.
The core harness provides electrical power to the control and monitoring systems located in the core compartment:
The electrical harness in the core area interfaces with the junction box.
The core harness provides electrical power to the control and monitoring systems located in the core compartment:
- core compartment fire detection system,
- pressure regulating valve and high pressure valve position indication (open and closed),
- second vibration accelerometer.
C. Attachment and Connection
The harnesses and cables are routed around the engine.
They are attached to the engine brackets by means of clips and clamps.
The harness connectors are connected at the junction boxes which are located under the engine pylon.
The harnesses and cables are routed around the engine.
They are attached to the engine brackets by means of clips and clamps.
The harness connectors are connected at the junction boxes which are located under the engine pylon.