W DOC AIRBUS | AMM A320F

MAIN GEAR AND DOORS - DESCRIPTION AND OPERATION


** ON A/C NOT FOR ALL
1. General
The Main Landing Gear (MLG) retracts into bays on the underside of the aircraft. The MLG bays are closed by the MLG doors (Ref. AMM D/O 32-12-00-00).
** ON A/C NOT FOR ALL
2. Component Location
The MLG (Ref. AMM D/O 32-11-00-00) is in the wing between the rear spar and gear rib 5 at zones 730 and 740. They support the aircraft on the ground and absorb loads during landing, take off and taxi.
** ON A/C NOT FOR ALL
3. System Description
The MLG includes these parts:
  • a MLG shock absorber
  • a side stay assembly which includes a lock stay
  • a retraction actuator
  • electrical and hydraulic dressings
  • a torque-link damper.

The MLG legs have twin wheels, each wheel has a multi-disc brake unit (Ref. AMM D/O 32-40-00-00).
** ON A/C NOT FOR ALL
4. Power Supply
Not applicable
** ON A/C NOT FOR ALL
5. Interface
Not applicable
** ON A/C NOT FOR ALL
6. Component Description
Not applicable
** ON A/C NOT FOR ALL
7. Operation/Control and Indicating
The extension and retraction system (Ref. AMM D/O 32-30-00-00):

Proximity sensors on the MLG and the MLG doors give position data to the Landing Gear Control and Interface Unit (LGCIU).

Each MLG has three doors (Ref. AMM D/O 32-12-00-00):
  • a fixed fairing door that is attached to the MLG leg
  • a hinged door that is attached to the underside of the wing
  • a main door that is hydraulically operated and closes the section of the fuselage after the MLG has retracted or extended.
** ON A/C NOT FOR ALL
8. BITE Test
Not applicable
[Rev.10 from 2021] 2026.04.01 12:29:36 UTC