RAZOR SUPPLY - DESCRIPTION AND OPERATION

** ON A/C NOT FOR ALL

1. General
An electrical razor socket is installed in each lavatory.

** ON A/C NOT FOR ALL

2. Component Location

Razor Supply System - Component Location. ** ON A/C NOT FOR ALL

Razor Supply - Component Location ** ON A/C NOT FOR ALL

FIN	FUNCTIONAL DESIGNATION	ZONE	ATA REF
** ON A/C NOT FOR ALL
2MT	INVERTER-STATIC	260	25-44-00
** ON A/C NOT FOR ALL
10MT	MINI INVERTER	200	25-44-00

** ON A/C NOT FOR ALL

3. System Description

Razor Supply System - Component Location. ** ON A/C NOT FOR ALL

The razor supply system has:

a circuit breaker
a static inverter
a razor socket in each lavatory (US/European type).

The circuit breaker (1MT) is installed on the panel 2001 VU and protects the system.
The static inverter (2MT) is installed near the panel 2001 VU in the aft cabin overhead-compartment in Zone 263.
The razor sockets (3MT) are installed in the service cabinets of each lavatory.

Razor Supply - Component Location ** ON A/C NOT FOR ALL

The mini inverter 10MT and a razor power outlet-socket (115V/60HZ) are installed in the service cabinet of each lavatory.

** ON A/C NOT FOR ALL

4. Power Supply

Electrical - Schematic ** ON A/C NOT FOR ALL

Power Supply - Schematic ** ON A/C NOT FOR ALL

The service bus 212XP supplies 115V AC/400Hz through the circuit breakers (1MT) to a contact in the razor outlet sockets. When a plug is put into a socket, the contact closes and the power is supplied to the static inverter (2MT). The static inverter (2MT) supplies 110V/60Hz to the razor power-outlet socket.

** ON A/C NOT FOR ALL

5. Component Description

A. Static Inverter

Static Inverter ** ON A/C NOT FOR ALL

[Rev.10 from 2021] 2026.04.01 06:20:45 UTC