DOC AIRBUS | AMM A320FCURTAINS AND PARTITIONS - DESCRIPTION AND OPERATION
** ON A/C NOT FOR ALL
1. General
Dividers are installed to divide the utility areas and the passenger seating areas in the cabin.
** ON A/C NOT FOR ALL Dividers are installed to divide the utility areas and the passenger seating areas in the cabin.
2. Component Location
For the location of this component, refer to paragraph Component Location
(Ref. AMM D/O 25-00-00-00).
** ON A/C NOT FOR ALL For the location of this component, refer to paragraph Component Location
Dividers - Component Location(Ref. AMM D/O 25-00-00-00).
3. Component Description
A. Curtains
Curtains divide the utility areas from the passenger seating area.
The curtains hang on hooks which slide in light alloy rails. Brackets attach the rails to the galleys, lavatories, stowage compartments and/or the overhead stowage compartments.
Curtains divide the utility areas from the passenger seating area.
The curtains hang on hooks which slide in light alloy rails. Brackets attach the rails to the galleys, lavatories, stowage compartments and/or the overhead stowage compartments.
B. Partitions (if installed)
The partitions can be installed in the cabin between FR20 and FR66. Special fittings attach the partitions to the seat tracks of the cabin and on top to the overhead stowage compartment or the ceiling.
Each partition is made of a composite structure material and has a decorative cover. The edges of the partitions have a light alloy profile.
The supports which hold the attach fittings are bonded into the composite structure of the partition.
The partitions can be installed in the cabin between FR20 and FR66. Special fittings attach the partitions to the seat tracks of the cabin and on top to the overhead stowage compartment or the ceiling.
Each partition is made of a composite structure material and has a decorative cover. The edges of the partitions have a light alloy profile.
The supports which hold the attach fittings are bonded into the composite structure of the partition.
C. Movable Class Divider (if installed)
The movable class divider has a center part and two lateral parts with curtains. The single beam class divider is a mono block. You can relocate the parts in the cabin without tools quickly.
The movable class divider has a center part and two lateral parts with curtains. The single beam class divider is a mono block. You can relocate the parts in the cabin without tools quickly.
(1) Center class divider
A quick release mechanism attaches the beam of the center part on top of the overhead stowage compartments.
Curtains are attached to the curtain rail of the beam with hooks.
A quick release mechanism attaches the beam of the center part on top of the overhead stowage compartments.
Curtains are attached to the curtain rail of the beam with hooks.
(2) Lateral class divider
A quick release mechanism attaches each of the lateral supporting beams to the connection panels installed in the lower part of the overhead stowage compartments.
Curtains are attached to the curtain rail of the beam with hooks.
No Smoking/Fasten Seat Belt signs are installed in some supporting beams and electrically connected to the aircraft system through the connection panels.
The connection panels are located at each seat row between frames 22 and 64 except in the area of the emergency exits.
A quick release mechanism attaches each of the lateral supporting beams to the connection panels installed in the lower part of the overhead stowage compartments.
Curtains are attached to the curtain rail of the beam with hooks.
No Smoking/Fasten Seat Belt signs are installed in some supporting beams and electrically connected to the aircraft system through the connection panels.
The connection panels are located at each seat row between frames 22 and 64 except in the area of the emergency exits.
(3) Single beam class divider
The single beam class divider slides along rails that are attached below overhead stowage compartments.
Curtains are attached to the curtain rail of the single beam class divider.
The single beam class divider slides along rails that are attached below overhead stowage compartments.
Curtains are attached to the curtain rail of the single beam class divider.