DOC AIRBUS | AMM A320FCABIN ATTENDANT SEATS - DESCRIPTION AND OPERATION
** ON A/C NOT FOR ALL
** ON A/C NOT FOR ALL
1. General
Cabin attendant seats are installed in the cabin for the cabin attendants to use during take-off and landing.
** ON A/C NOT FOR ALL Cabin attendant seats are installed in the cabin for the cabin attendants to use during take-off and landing.
2. Component Location
A. Seat Layout
Cabin Attendant Seat - Component Location ** ON A/C NOT FOR ALL
Cabin Attendant Seat - Component Location ** ON A/C NOT FOR ALL
For the location of this component, refer to paragraph Component Location
(Ref. AMM D/O 25-00-00-00)
Cabin Attendant Seat - Component Location ** ON A/C NOT FOR ALL Cabin Attendant Seat - Component Location ** ON A/C NOT FOR ALL (Ref. AMM D/O 25-00-00-00)
| FIN | FUNCTIONAL DESIGNATION | PANEL | ZONE | ACCESS DOOR | ATA REF |
|---|---|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||||
| 6106MM | CABIN ATTENDANT SEAT | 200 | 25-10-00 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6104MM | CABIN ATTENDANT SEAT | 200 | 25-10-00 | ||
| 6120MM | PADDING | 240 | 25-10-00 | ||
| ** ON A/C ALL | |||||
| 6100MM | CABIN ATTENDANT SEAT | 200 | 25-22-41 | ||
| 6101MM | CABIN ATTENDANT SEAT | 200 | 25-22-41 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6105MM | CABIN ATTENDANT SEAT | 200 | 25-10-00 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6107MM | CABIN ATTENDANT SEAT | 200 | 25-22-41 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6115MM | CABIN ATTENDANT SEAT | 200 | 25-22-42 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6116MM | CABIN ATTENDANT SEAT | 200 | 25-22-42 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6133MM | CABIN ATTENDANT SEAT | 200 | 25-53-51 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6117MM | CABIN ATTENDANT SEAT | 200 | 25-10-00 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6108MM | CABIN ATTENDANT SEAT | 200 | 25-22-41 | ||
| 6140MM | ADAPTERPLATE FWD. D2 LH | 200 | 25-22-42 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6114MM | CABIN ATTENDANT SEAT | 200 | 25-10-00 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6141MM | ADAPTERPLATE FWD. D2 RH | 200 | 25-22-42 | ||
| ** ON A/C NOT FOR ALL | |||||
| 6142MM | ADAPTERPLATE FWD. D3 RH | 200 | 25-22-42 | ||
3. Description
The cabin-attendant seats (CAS) are installed in the areas of the passenger/crew doors and emergency exits.
The floor mounted cabin-attendant seats are installed on the seat tracks or on the cabin floor-structure (hardpoint mounted).
The wall mounted cabin-attendant seats are installed on:
** ON A/C NOT FOR ALL The cabin-attendant seats (CAS) are installed in the areas of the passenger/crew doors and emergency exits.
The floor mounted cabin-attendant seats are installed on the seat tracks or on the cabin floor-structure (hardpoint mounted).
The wall mounted cabin-attendant seats are installed on:
- The lavatory walls
- The galley walls
- The stowage walls.
4. Interface
The cabin-attendant seats have handset/cradles which are available as an option.
The handset/cradles have interfaces with:
** ON A/C NOT FOR ALL The cabin-attendant seats have handset/cradles which are available as an option.
The handset/cradles have interfaces with:
- The Cabin Intercomunication Data System (CIDS) (Ref. AMM D/O 23-73-00-00).
5. Component Description
A. The cabin-attendant seats have:
- A seat frame
- A backrest with a cushion
- A seat pan with a cushion
- A headrest with a cushion
- A stowage compartment
- A restraint system.
- A seat frame
- A backrest with a cushion
- A seatpan with a cushion
- A headrest with a cushion
- A stowage compartment
- A restraint system.
- A seat frame
- A backrest with a cushion
- A seatpan with a cushion
- A headrest with a cushion
- A stowage compartment
- A restraint system.
(1) Seat Frame:
The seat frame, which includes two side frames and a backrest framework, is made of light alloy.
The seat frame, which includes two side frames and a backrest framework, is made of light alloy.
(2) Headrest:
The headrest has a foam cushion which is covered with a fabric seat-cover.
The headrest has a foam cushion which is covered with a fabric seat-cover.
(3) Backrest:
The backrest has a foam cushion which is covered with a fabric seat-cover.
The backrest has a foam cushion which is covered with a fabric seat-cover.
(4) Seatpan:
The seatpan is made of a light alloy and has a foam cushion with a fabric seat-cover. The seat pan is spring loaded to return the seat to the retracted position when it is not in use.
The seatpan is made of a light alloy and has a foam cushion with a fabric seat-cover. The seat pan is spring loaded to return the seat to the retracted position when it is not in use.
(5) Restraint System:
The restraint system is divided into a seat belt assy and a shoulder harness.
Each cabin-attendant seat has a seat belt assy and a shoulder harness with a center buckle. The shoulder harness uses inertia reels to automatically pull it in when the seat is not in use. Static type shoulder harnesses are available as an option.
The restraint system is divided into a seat belt assy and a shoulder harness.
Each cabin-attendant seat has a seat belt assy and a shoulder harness with a center buckle. The shoulder harness uses inertia reels to automatically pull it in when the seat is not in use. Static type shoulder harnesses are available as an option.
(6) Stowage Compartment:
Each CAS has a stowage compartment which has a spring-loaded latch door.
The stowage compartment can be used to stow emergency equipment.
Each CAS has a stowage compartment which has a spring-loaded latch door.
The stowage compartment can be used to stow emergency equipment.