DOC AIRBUS | AMM A320FPLACARDS AND MARKINGS - DESCRIPTION AND OPERATION
** ON A/C NOT FOR ALL
** ON A/C NOT FOR ALL
1. General
This chapter gives information and maintenance procedures related to placards and markings.
Information about placards and the description and location of the markings are available from the sources that follow:
** ON A/C NOT FOR ALL This chapter gives information and maintenance procedures related to placards and markings.
Information about placards and the description and location of the markings are available from the sources that follow:
- All placards and markings that are installed on the aircraft at the time of delivery are in e-drawing on Airbus World.
NOTE: The e-drawing gives the accurate position of the placard for its installation on the surface.
- Procurable Airbus-proprietary placards and markings are available in the Illustrated Parts Catalog (IPC).
NOTE: The IPC gives a general view of the placard location (without the dimension).
- Placards and Markings that are necessary for EASA Type Certification are given in the document "A320 family EASA required placards and marking". This document is available on Airbus World.
- Maintenance Procedures for removal and installation of placards and markings are available in the Aircraft Maintenance Manual (AMM).
2. Labels
A. General
(1) Standard type No.1 label
(2) Standard type No.2 label
(3) FOTOFOIL type No.3
Standard No.1 and 2 labels are in plastic material with white letters on black matt finish.
Type No.3 labels are in 0.076 mm (0.002 in.) metal foil for use in skydrol zones with white letters on black matt finish.
Standard No.1 and 2 labels are in plastic material with white letters on black matt finish.
Type No.3 labels are in 0.076 mm (0.002 in.) metal foil for use in skydrol zones with white letters on black matt finish.
Dimensions of the Labels3. Label Replacement
This chapter gives the replacement procedure of the different types of labels:
** ON A/C NOT FOR ALL This chapter gives the replacement procedure of the different types of labels:
- Decals
- Nameplates (For example on circuit breaker panel)
- Identification bands on metal lines
- Labels on heat-resistant ducting
- Labels on laminations
- ESSO labels
- SSO (SCOTCHCAL) labels
- FOTOFOIL labels
- BSB (DUROFIX) labels
- Metal identification plates
- Labels on landing gear
- Engine leasing plate
- Hoisting point cover patches
NOTE: This list does not include all the labels installed on the aircraft.
The installation or replacement of labels or instruction placards attached by different types of threaded fasteners or rivets is not given below since no special procedure is necessary.
The installation or replacement of labels or instruction placards attached by different types of threaded fasteners or rivets is not given below since no special procedure is necessary.
4. Paint markings
This chapter provides the location and pictorial illustration of the painted
exterior markings on the aircraft.
This chapter provides the location and pictorial illustration of the painted
exterior markings on the aircraft.
NOTE: The markings given in the figures that follow are only for example and to show the most usual painted markings. Some of these markings may be optional in relation to the aircraft and/or airline configuration. For detailed information about painted markings, refer to the e-drawings.