INDICATING - DESCRIPTION AND OPERATION

** ON A/C NOT FOR ALL

1. General

ECAM Display Unit ** ON A/C NOT FOR ALL

Oil Indication Display on the ECAM System ** ON A/C NOT FOR ALL

Oil System Sensors-Location ** ON A/C NOT FOR ALL

Oil Indicating-Electrical Power Supplies ** ON A/C NOT FOR ALL

Oil system monitoring is performed by means of :

Indications :
oil quantity (quarts)
oil temperature (degree celsius)
oil pressure (PSI)
oil filter clogging (OIL FILTER CLOG).

These indications are displayed on the lower display unit of the ECAM system (main instrument panel) except the Master Chip Detector that gives a pop out information through its indicator in the fan compartment.

NOTE: If the C/B 2EN1(2) is pulled, the oil pressure indication will be crossed amber for engine 1(2) on the ECAM and the thrust reverser system of the engine 1(2) will be inoperative in case of reverser selection by the crew.

[Rev.10 from 2021] 2026.04.01 03:39:26 UTC